Passage function: Once the lock is unlocked, the lower lever latch will remain at unlock position. The top dead bolt and the lower latch will be locked by pulling the lever handle all the way up from either side of the lock.

Storeroom function: Once the lock is unlocked, the lower lever latch will be locked automatically after closing the door. Free to unlock the lower lever latch from inside by turning lever. To lock the upper deadbolt and lever latch from outside, press the remote controller and pull the lever up.

Common System Features:

• Easy to operate - just lift the lever handle to lock and press down to unlock the door from inside
• Passage or Storeroom functions are available
• Low power warning: yellow light will blink
• Microchip hopping code is used, impossible to be copied or entrapped.
• Alarm will sound when emergency cam lock is picked

Specifications:

• Door thickness: 1-3/8" to 2 " (35mm and 50mm)
• Back set 2-3/8" and 2-3/4" (60mm and 70mm)
• Distance between latch and deadbolt: 5.5" (140mm)
• Battery operated: 4xAA batteries
• Number of users: 20 users
• Key fob:2 remotes key fobs included
  

1. Can I reverse hands?
2. Can I change lock function from passage to storeroom function?
3. How hard is it to install the lock?
4. Why my burglar alarm sounds?
5. Why does red light will glow?
6. Why do both Red and Green do flashing and Beeper alarm sounds?
7. How long do we need replace batteries?
8. Can we use chemicals to clean or polish our lock?
9. How can we open the code cover?
10. If there are two digital remote control locks near by, can the other controller open my lock?
11. When one of the remote controller missing or lost, how do I delete that?

1. Can I reverse hands?
Yes. Our locks can be reverse left or right by rotate rotor, hands without disassembling the locks case.

2. Can I change the lock function from passage to storeroom function?
Yes, the unique and simple patented lockset mechanism is flexible to fit to passage or storeroom. The simple change instruction will be provided without charge, if requested.

3. How hard is it to install the lock?
It is very easy to install. We provide free charge door preparation jig and strike position locator to help you to install our locks.

4. Why my burglar alarm sounds?
The burglar alarm will sound when emergency key is used, if the batteries or electronics are operating normally. The alarm will sound for 10 seconds and quit for 6 seconds. This cycle will be repeated 8 times.

5. Why does red light will glow?
Red light will glow when a wrong code is entered.

6. why do both Red and Green do flashing and Beeper alarm sounds?
Both Red and Green are flashing indicates that the entry has been attempted with an incorrect code 3 times. Beeper alarm activates after three incorrect codes are entered, and blocks further attempts of entry for two minutes.

7. How long do we need replace batteries?
We suggest every two years (for the keypad model), and one year (for the remote controller model), even if the yellow light does not glow. To remove the battery housing: insert tool in the pinhole at the center-left of the inner escutcheon, depress to release and remove the housing, replace batteries.

8. Can we use chemicals to clean or polish our lock?
Do not use chemicals or abrasive materials to clean the lock.

9. How can we open the code cover?
Insert tool into the pinhole at top right side of the escutcheon and depress to release code cover.

10. If there are two digital remote control locks near by, can the other controller open my lock?
No, unless you allow the other controller to be programmed to your lock.

11. When one of the remote controller missing or lost, how do I delete that?
Delete all the controllers and reprogram every one you have.